Samurai® CR317INT Insulated Cut Resistant Gloves ANSI Cut Level A5|
Samurai CR317INT gloves are cut resistant, water repellant and insulated! A ten gauge terry cloth liner inside shell keeps you warm while a Tuffalene® brand HDPE outer shell provides ANSI level 5 cut resistance. An awesome combination of cold condition wearability and cut resistance.
- ANSI Cut Level A5
- ANSI Level 5 Puncture Resistance
- Sold by the pair
- Water repellant shell
- Tuffalene® HDPE Shell
- Black Foam latex Dipped Palm and Fingers
- Outstanding Comfort, Dexterity and Abrasion Resistance.
****Please note that with the new standards released by ANSI, the CR317INT are now classified as a cut level A5 and perviously an A4. Remaining stock will still be labeled level 4 but they are indeed a level 5 by the new standards. Once the manufactures remaining stock is depleted new stock will be labeled A5.
Excellent industrial protection in a wide range of mechanical, assembly, HVAC and cut hazards. Perfect for cold condition cut resistant applications.
Share this Product
- Reviews (9)
- Questions (2)
My work gloves
I buy my own work gloves..I buy gloves for every type of work environment I'm in, (insulated, cut resistant, slip resistant high dexterity gloves.) These gloves are the best I've had and I have bought many types of gloves from many different plances and I will continue to buy my gloves from yourglo esource.com..highly recommended..great prices too..
mostly cut resistant & warm
We run banner line down ski runs. Needed a warm pair of work gloves that wouldnʻt get cut up when we reel up the line (orange plastic net banner line) - ski gloves were getting ruined. These work well if the edge of the tape stays away, friction not my friend. I would get another pair for next season for sure.
Insulated cut 5 gloves
Very good grip, warm on cold days, inner liner, like other gloves get loose, take them off properly. Overall I like them. Thanks
Perfect combination of warmth and dexterity
Probably the best combination of warmth and grip in a cut resistant glove. I bought these to use while chain sawing and splitting wood. They grip really well in cold weather and I found them to be excellent in handling wood on the splitter. They are plenty warm and have held up great. I highly recommend the CR317INT and will certainly buy more in the future.
Samurai® CR317INT Insulated Cut Resistant Gloves ANSI Cut Level A5
I am using them for outdoors work as a traffic controller so I stand in the cold for long periods of time. I like them but have a couple of comments the gloves are warm as stated. In the rain water gets in the non rubber part the inner glove comes off sometimes when removing them when my hands are damp it can be very difficult to get them back on.