Great White 3GX 19-D322 Dyneema Cut Resistant Gloves, Cut Level A3
|QTY||Price Per Pair||Discount|
|1 Pair||$8.64 ea.||5% Off|
|3 Pair Pack||$8.20 ea.||10% Off|
|12 Pair Pack||$7.74 ea.||15% Off|
When you need tough protections against cuts, punctures, scrapes, and any number of other common hazards, try our Great White Dyneema cut-resistant gloves. Every pair is scientifically designed to protect your hands from harm while still allowing for maximum comfort and maneuverability. Order one, three, or 12 pairs now. Cheaper by the dozen. Only $8.50/pair
The Great white 3GX 19-D322 With Dyneema® Diamond Technology. Cut resistance can be doubled compared to Dyneema® Continuous Filament Technology. Great white 3GX has a comfort level that provides the user with cool, non-irritating cut resistant protection in the working environment. It feels like you are not even wearing gloves. But, above all, is the cost-effective and unparalleled durability that stands up to laundering for long lasting value.
Great White Dyneema cut-resistance gloves are ideal for both home and work use. Whether you are handling wood crates, sharp metal beams, or thorny bushes, these gloves will protect your hands from any unfortunate and painful accidents. With an ANSI cut level of 3, Great White Dyneema cut-resistant gloves can take quite a beating and still provide adequate hand protection under most conditions.
We know you’re in a hurry to get right to work, so our services are always fast and secure. We’ll ship your gloves via your requested method without delay, but only after we have carefully verified that your order is correct.
Should any errors or problems occur, call us at 1-800-974-3122. We are proud to say that our customer service is top-notch, and we will happily answer any questions or concerns. From start to finish, we want to make shopping with us as simple and efficient as possible.
To ensure that our Great White Dyneema cut-resistant gloves will fit right, you should measure the total circumference around the palm of your dominant hand using a tape measurer. Once done, remember that each glove size is approximately a half inch larger than the previous size. For example, XS gloves are for 7” hands, S for 7.5” hands, XXL for 10” hands, and so on and so forth.
Follow these instructions and then use the drop-down menu above to make your selection. Once you place your order, we’ll send you your comfortable work gloves as soon as possible.
- Sold by the pair
- ANSI Cut level 3
- Seamless construction offers increased comfort and breathability
- Dyneema Diamond Technology
- Dyneema® Diamond blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Glove Material Weight: 13 gauge
- Available in sizes XS-XXL
- Polyurethane coated palm for great abrasion resistance, excellent
- puncture resistance and outstanding wet/dry grip
- Knit wrist helps prevent dirt and debris from entering the glove
- Cotton color binding denotes sizing
Want to know how cut resistant gloves are rated? Click here
What are cut resistant gloves made of? Click here
EN388: 4441 ANSI Cut Level 3
ABRASION 012345 CUT 012345 TEAR 012345 PUNCTURE 0 1 2 3 4 5
WARNING: Cancer - www.P65Warnings.ca
I've had one pare of these gloves for 3 years. Finely got a hole in one. Time to buy more.
Very happy with gloves and shipping was quick
Great service and fast shipping!
great gloves. would recommend to others.
I’ve been using these gloves as my go to work gloves in a variety of situations. Typically I’m using them in metal fabrication tasks. However recently I had to do some work helping my brother out in his vineyard doing shoot thinning. That particular task is extremely hard on the fingers. My brother has a system where he literally glues athletic tape to his fingertips because every glove he’s tried with enough tactile sensitivity just wears out. The task requires fingertip sensitivity and extreme abrasive resistance, it’s basically digging through rough bark to find buds as small as 1/8”. This is a 12 hour a day job, he was going through 2-3 sets of tape a day. I decided to try an already worn set of these gloves out for the job. All I can say is is impressive. Within a day the grip coating was worn off the fingertips, however the glove material just refused to wear out. I put in 50 hours on one pair that I’d already worn in my shop for several months of daily use, and they’re still not worn through. Best gloves on the planet for combined tactile sensitivity and durability.
We Also Recommend
MaxiFlex Cut 34-8743 Cut Resistant Work Gloves by ATG, Free Shipping! ANSI Cut Level A2